1.Unlimited programming effects  

2.Special lighting effect  

3.32-bit colour (16.7 million color combinations)  

4.Modular & highly portable 

5.No technical experience required  

6.Quick and easy installation  

7.More affordable than any existing solutions 

8.Sealed for long, durable lifetime  

9.No bulbs to replace  

10.Indoor use in well temperate rooms

2. Specifications

      2.1 Physical Specifications

    2.2  Electrical Specifications

3.  Installation Method

    3.1 Installation Steps

1. Please hand this light into the suitable place with suitable angel (if operate the light in external place, please remember to get some water-proof cover to protect them.).

2. To connect the signal cable, plug one side into IN socket in the back of light and plug another side into OUT signal connector in the DMX 512 board(signal input: 1=>Ground, 2=>Data, 3=>data+).

3. To connect the cable and put into power, them the light stay in the status to receive the operation signal like : Music, Automatic, DMX512ect. Take note: Please out off the power line if you will not operate it for a certain time.

    3.2  Fixture Linking

To run your light shows of one or more fixtures using DMX-512 controller or to run synchronized shows on two or more fixtures in master/slave operating mode , you need DMX cables to link the units from DMX IN to DMX OUT.

Notice: the length of signal cables should be within 100meters, to prevent the signal interference by other appliances because of the long signal cables.

    3.3 AC Power

The fixture is designed to work on 110-240V 50/60Hz.Before applying power to a unit, check that the source voltage matches the unit’s requirement.

4.Important

       Do not power the installation process.

  When installing our LED-products, please employ an electrician, who can exactly follow our  installation instructions.

 5.Pictures of Products

If you have any questions,please contact with me freely,thanks!

related products: